Leigh D4R-24" Dovetail Jig

The new D4R-24 jig features a one piece aluminum extrusion base with machined-in non-marring textured clamping surfaces and machined-in side stops on the top and front of the jig body. The top-side stops have a 3/8" recess for rabbeted boards. The D4R easily produces handmade looking dovetail pins and tails. Perfect fitting joints for tiny boxes or large case pieces can be produced in a variety of patterns by simply changing the adjustable guide fingers. Wooden pieces are clamped into the jig quickly and easily with the cam action clamps which can be adjusted for different stock thickness or used to repeat the same clamp tension instantly. Through or half-blind dovetails can be easily set up by simply flipping the finger assembly over. Jigs are meticulously engineered and constructed. Accepts boards up to 24" wide. Maximum pin thickness 1-1/4". Includes three carbide router bits, a 1/2" D x 8 degree x 8mm dovetail bit and a 5/16" x 1" x 8mm straight bit for through dovetails, and a 1/2" D x 14 degree x 8mm dovetail bit for half-blind dovetails. Also included is a 1/2" to 8mm collet reducer, a 7/16" template guidebushing, a comprehensive instruction manual and instructional DVD.

With the ability to cut half-blind-, through-, and sliding dovetails right out of the box, the Leigh D4R Pro 24-Inch Dovetail Jig allows you to customize the spacing of your joints for a classic hand-cut look. You can work with boards up to 24 inches wide and 1-1/4 inches thick, and the Leigh D4R Pro comes with an easy-to-understand instructional manual and DVD. With the option for five additional templates, your Leigh D4R Pro will give you all the joinery options you need.

D4R Pro 24-Inch Dovetail Jig At a Glance: Infinitely adjustable guide fingers to customize your work Single-pass half-blind dovetails Cut half-blind-, through-, and sliding dovetails, or finger and box joints right out of the box Non-slip clamping surface and cam-action speed clamps for securing boards Rugged construction with machined side stops ensures precise joint alignment every time

Create precise plunge-routed shelf-pin holes for cabinetmaking. View larger.

Variably spaced through dovetails up to 1-1/4 inches. View larger.

Cuts a variety of dovetail joints. View larger.

Cuts a Variety of Dovetail Joints
The Leigh D4R Pro 24-Inch Dovetail Jig features a versatile finger assembly that gives you the ability to cut through dovetails for joining wide panels of a cabinet, half-blind dovetails for drawers, or sliding dovetails for cabinet work and shelving.

Adjustable Guide Fingers to Customize Your Work
Unlike most dovetail jigs, the D4R Pro allows you to arrange your dovetail pattern as if you were going to cut the joints by hand. You design the layout and then set the jig to fit the work. Using the included guide finger screwdriver, you can adjust the fingers to match the layout that you designed. Once you set the spacing for the tails, you can simply flip the finger assembly around and you will have the correct spacing for the pins.

The easy-to-read, calibrated scale at each end of the finger assembly helps you align the work piece so that it remains parallel to the fingers.

Half-Blind Dovetail and Box-Joint Spacers Increase Efficiency
The D4R Pro features two new spacers that allow you to cut half-blind dovetail joints with a single pass, and finger/box joints with accuracy and precision. With the use of a dual-function spacer that creates the ideal spacing between the fingers, the correct offset on the tail board, and limits the distance the router can travel, you can quickly cut half-blind dovetail, box, or finger joints that fit together perfectly.

Durable Construction of Jig Body and Side Stops Ensure Precise Joint Alignment
The base of the D4R Pro is a rugged one-piece aluminum extrusion with machined side stops that align boards in the correct position each time. Top side stops are constructed so that a rabbeted drawer will fit underneath, allowing you to rout the front of the drawer without offsetting the tail board.

Cam-Action Speed Clamps Work Quickly to Secure Boards
Two clamp bars hold work pieces horizontally or vertically in place, and the quick-acting cams operate with levers to easily secure and release the clamps during operation.

Easy to Assemble and Operate
With a detailed instructional manual that supplies illustrated step-by-step instructions for assembly and operation, the D4R Pro is easy to set up and use. A 50-minute instructional DVD is also helpful if you want to see the Jig in action. The D4R Pro can be used with almost any router, and the included Leigh e7 template guide bush helps guide the bit through the wood without touching the guide bush or the guide surface.

Optional Templates for Additional Joinery Options
Five optional templates expand the D4R Pro's capabilities to include finger joints, Isoloc joints, and multiple mortise and tenon joints.

What's in the Box
Leigh D4R Pro 24-Inch Dovetail Jig, two dovetail bits, one straight bit, one collet reducer, 5/64" hex key, e7 template guide bush, square-head guide finger screwdriver, Leigh wrench/gauge, four cam-action speed clamps, nylon stop rod, single pass spacer, box-joint spacer, half-blind bridge-piece material, sliding dovetail fence, fully illustrated user guide, instructional DVD, and warranty/registration card.

END

---

PRODUCT NAME: Rockler JIG IT Shelving Jig and 1/4-Inch Bit Set